| COMTECH
EF DATA |
| TERMINALS |
|
Model |
|
 |
L-band |
lcs-4
l-band combiner switch The Comtech EF Data LCS-4
Combiner Switch is an indoor unit that provides combining / splitting
for L-Band modems, plus it operates as a redundancy controller for
RF switches located at the antenna |
 |
|
Data Sheet |
 |
C-band |
CST-5005 C-Band Satellite Terminal The
Comtech EFData CST-5005 is a low- to medium-power, C-band, satellite
earth station, and electronics terminal configured in two assemblies.
The CST-5005 meets all requirements for operation on private and regional
domestic C-band satellite networks. |
|
|
Data
Sheet |
 |
C-band |
CST-5000 C-Band Satellite Terminal The
Comtech EFData CST-5000 is a low- to medium-power, C-band, satellite
earth station, and electronics terminal configured in two assemblies.
The CST-5000 meets all requirements for operation on private and regional
domestic C-band satellite networks. The feed assembly consists of
a transmit reject filter (TRF) and low noise amplifier (LNA). |
|
|
Data
Sheet |
 |
C-band |
HP-CST5000 C-Band Satellite Terminal, High Power The
Comtech EFData’s HPCST-5000 is a high-power, high performance, C-band
satellite earth station terminal which may be configured for single
thread or 1:1 redundant systems. The integrated high-power transceiver
system consists of a traveling wave tube amplifier (TWTA) or solid
state power amplifier (SSPA). |
|
|
Data
Sheet |
 |
C-band |
DST-C C-Band Digital Satellite Terminal System
The Comtech EF Data DST-C is an integrated, single thread, Single
Channel Per Carrier (SCPC), Very Small Aperture Terminal (VSAT) system
designed to meet the needs of single and/or multiple site installations.
|
|
|
Data Sheet |
 |
KU-band |
DST-KU Ku-Band Digital Satellite Terminal System
The Comtech EF Data DST-KU is an integrated, single thread,
Single Channel Per Carrier (SCPC), Very Small Aperture Terminal (VSAT)
system designed to meet the needs of single and/or multiple site installations.
|
|
|
Data
Sheet |
|
|
C-band |
iProSat
C-Band Satellite IP Terminal The Comtech EF Data iProSat-C
is an IP (Internet Protocol) enabled Very Small Aperture Terminal
(VSAT) system for C-band designed to meet the needs of single and/or
multiple site installations. |
|
| |
 |
KU-band |
iProSat
Ku-Band Satellite IP Terminal
The Comtech EF Data iProSat-Ku is an IP (Internet Protocol)
enabled Very Small Aperture Terminal (VSAT) system for Ku-band designed
to meet the needs of single and/or multiple site installations.
|
|
| |
 |
KU-band |
KST-12000 Ku-Band Satellite Terminal The Comtech EFData KST-12000
is a Ku-band satellite earth station and electronics terminal configured
in two assemblies:
• The feed assembly
• The outdoor enclosure assembly
The KST-12000 meets all requirements for operation on
private and regional domestic Ku-band satellite networks. |
|
|
Data
Sheet |
 |
KU-band |
KST-12025 Ku-Band Satellite Terminal The
Comtech EFData KST-12025 is a 25W Ku-band satellite earth station
and electronics terminal configured in two assemblies:
• The feed assembly consists of a transmit reject filter
(TRF) and low noise amplifier (LNA).
• The outdoor enclosure assembly consists of a solid
state power amplifier (SSPA), up/down converters,
monitor and control (M&C) microprocessor, and power
supply. |
|
|
Data
Sheet |
|
| KU-band
|
HP-KST12000 Ku-Band
Satellite Terminal, The Comtech EF Data High Power HPKST-12000
is a high-power, high-performance, Ku-band satellite earth station
terminal which may be configured for single thread or 1:1 redundant
systems. The integrated high-power transceiver system consists
of a traveling wave tube amplifier (TWTA) or solid state power amplifier
(SSPA). |
|
|
Data
Sheet |
| |
EQ-90 Amplitude Equalizer
|
EQ-90 Group Delay
Amplitude Equalizers The
Comtech EF Data EQ90 Group Delay/Amplitude Equalizers are used in
satellite transmit/receive terminals to compensate for nonlinear
delay distortions and amplitude slope generated by the satellite,
filters, waveguide, or inter-facility links. Fully compliant with
DOMSAT and INTELSAT/CCIR standards, these units interface readily
with the uplink/downlink chain. |
|
|
Data Sheet |
|
TRANSCEIVERS |
| |
C-band |
CSAT 5060 ( 5, 10,
or 25 Watt) C-Band Transceiver
The CSAT-5060 is the perfect choice for your VSAT application for
TDMA, DAMA, SCPC/MCPC, or any other point to point applications.
The CSAT-5060 has been developed by a team of RF engineers with
many years of experience in designing and manufacturing satellite
transceivers and other RF products. T |
|
|
Data
Sheet |
| |
C-band |
CSAT 5060 ( 50 or
100 Watt) C-Band Transceiver The
Comtech EF Data CSAT-5060 is the perfect choice for your VSAT application
for TDMA, DAMA, SCPC/MCPC, sites requiring higher power. The CSAT-5060
has been developed by a team of RF engineers with many years of
experience in designing and manufacturing satellite transceivers
and other RF products. |
|
|
Data
Sheet |
|
|
C-band |
CSAT 6070 (5, 10, or 25 Watt) C-Band Transceiver
The Comtech EF Data CSAT-6070 is
the perfect choice for your VSATapplication for TDMA, DAMA, SCPC/MCPC,
or any otherpoint-to-point application. |
|
|
Data
Sheet |
 |
C-band |
CSAT 6070 (50 or 100 Watt) C-Band Transceiver
The Comtech EF Data CSAT-6070 is the perfect choice for your VSATapplication
for TDMA, DAMA, SCPC/MCPC, or any otherpoint-to-point application. |
|
|
Data
Sheet |
 |
KU-band |
KST-2000A (80W or less with LNA) Ku-Band Transceiver -
The Comtech EF Data - 13.75 to 14.5 GHz Tx (available ≤
40 watt),
14.0 to 14.5 GHz Tx optional (available
≤ 80 watt),
10.95 to 12.75 GHz Rx with wideband LNA, 70 or 140 MHz IF input/output,
Feedhorn-mounted SSPA (2, 4, or 8 Watts), Light weight units (intended
for spar mount), Modular construction for ease of upgrades, Transmit
only option available, Built-in Display and Keypad option (available) |
|
|
Data
Sheet |
 |
KU-band |
KST-2000B (80W or less with LNB) Ku-Band Transceiver
- The Comtech EF Data - 13.75 to
14.5 GHz Tx (14.0 to 14.5 above 32 watt),
10.95 to 11.70 GHz Tx optional
(available ≤ 80 watt),
10.95 to 11.70, 11.70 to 12.20 GHz or 12.25 to 12.75 GHz Rx, 70 or
140 MHz IF input/output, Feedhorn-mounted SSPA (2, 4, or 8 Watts),
Light weight units (intended for spar mount), Modular construction
for ease of upgrades. |
|
|
Data
Sheet |
 |
KU-band |
KST-2000L (2 or 4W with LNB) Ku-Band Transceiver The Comtech
EF Data KST-2000L Ku-Band satellite earth station transceiver is a
high performance, full featured transceiver. The converter unit controls
external SSPA's, and automatic gain control (AGC) is provided for
power output stability. |
|
|
Data
Sheet |
 |
X-band |
XSAT 7080 (5, 10, or 25 Watt) X-Band Transceiver The Comtech
EF Data XSAT-7080 has been developed by a team of RFengineers with
many years of experience in designing and manufacturing satellite
transceivers and other RF products. The XSAT-7080 embodies the best
design effort of the group. The XSAT-7080 is designed to provide the
user with superior performance, long-term reliability, and ease of
installation with a very price competitive product. |
|
|
Data
Sheet |
 |
X-band |
XSAT 7080 (50 or 100 Watt) X-Band Transceiver The Comtech EF
Data XSAT-7080 has been developed by a talented team of RF engineers
with many years of experience in designing and manufacturing satellite
transceivers and other RF products. The XSAT-7080 is designed to provide
the user with superior performance, long-term reliability and ease
of installation with a very price competitive product. |
|
|
Data
Sheet |
|
LNAs |
 |
C-band |
CLNA C-Band LNA The Comtech EF Data CLNA low noise amplifier
meets or exceeds system requirements for commercial geosynchronous
satellites worldwide. |
|
|
Data Sheet |
 |
C-band |
CLNA C-Band LNA, Redundant
The Comtech EF Data CLNA Redundant low noise amplifier meets or exceeds
system requirements. |
|
|
Data Sheet |
 |
KU-band |
KLNA Ku-Band LNA The Comtech EF Data KLNA low noise amplifier
meets or exceeds system requirements for commercial geosynchronous
satellites worldwide. Its compact design and rugged construction make
it ideal for transportable applications and severe environments. The
LNA has a comprehensive set of options to accommodate systems ranging
from VSATs to major earth stations. |
|
| |
 |
KU-band |
KLNA Ku-Band LNA, Redundant
Comtech EF Data redundant LNA systems include primary and backup LNAs
and an automatic switching controller. In case of primary LNA
failure, fast automatic switchover to the backup LNA reduces system
“down” time to a minimum. |
|
|
Data Sheet |
| |
Mike Termondt
- Phone: 1.805.649.1384 - Fax: 1.805.500.4328 - email
