AnaCom Inc.

REQUEST PRODUCT INFORMATION!
Super Extended
Ku-Band
Ku-Band Super Extended
C-Band
Extended
C-Band
Extended
C-Band VSAT
  Transceivers   Transceivers   Transceivers   Transceivers   Transceivers
  Protection Switch / Harness   Protection Switch / Harness   Transceivers/High Power   Transceivers/High Power    
  LNCs   LNCs   Protection Switch / Harness   Protection Switch / Harness    
  Installation Kits   Installation Kits
          Cable Options   Cable Options    
          LNCs   LNCs    
          Installation Kits   Installation Kits    

   
Back Super Extended Ku-Band Transceivers
Part  
Number Description
  TX Freq.    13.75 to 14.5 GHz
  RX Freq.   10.95 to 12.75 GHz (One LNC)
  AnaSat Super  Extended  Ku-Band VSAT Transceiver includes: 70 MHz IF input, RF output Type N for 0dBm and WR75 output for higher powers, fixed gain, M&C, independent TX/RX frequency and gain control, 165K LNC and 100 to 240 VAC auto-ranging power supply.
  Note: One (1) LNC covers the entire Receive Frequency band.
 
31275
AnaSat - 0 dBm SEKu-Band Transceiver
 
31276
AnaSat - 2W SEKu-Band Transceiver
 
31277
AnaSat - 4W SEKu-Band Transceiver
 
31278
AnaSat - 8W SEKu-Band Transceiver
 
31279
AnaSat - 16W SEKu-Band Transceiver
 
31279-20
AnaSat - 20W SEKu-Band Transceiver
 
31279-25
AnaSat - 25W SEKu-Band Transceiver
 
31655
AnaSat - 40W SEKu-Band Transceiver
 
31656
AnaSat - 50W SEKu-Band Transceiver
 
High Power (Includes 0 dBm and HPA)
31081-80
AnaSat - 80W SEKu-Band Transceiver
 
31081-100
AnaSat - 100W SEKu-Band Transceiver
 
31081-125
AnaSat -125W SEKu-Band Transceiver TWTA
(100W @ Flange.  One year warranty)
 
31081-400
AnaSat -350W SEKu-Band Transceiver TWTA
(300W @ Flange.  One year warranty)
   
Back  Super Extended Ku-Band Protection Switches / Harness
Part  
Number Description
  1:1 Protection Switch and Harness 
Select Part Number Below AnaSat - PS 1+1 Redundant Protection Switch includes:  Outdoor Control / Interface Box, WR75 TX and RX Waveguide Switches and Dummy Loads (Pricing for Dummy Loads rated for more than 100W not included).                                                                                                                                                      Redundant Cable Harness includes:  All Transceiver interconnect cables (length 3') and 3' flex waveguide pieces to interface with the TX and RX waveguide switches and the LNC.  The standard LNC cable length is 10'.
   
Protection Switch Serial Interface Options
31089
Protection Switch for use with single enclosure Transceivers and RS232 remote interface.
31090
Protection Switch for use with 0 dBm Transceivers and external HPAs and RS232 remote interface.
31260
Protection Switch for use with single enclosure Transceiver and RS485 remote interface.
31261
Protection Switch for use with 0 dBm Transceivers and external HPAs and RS485 remote interface.
 
Windows / MS DOS M&C Software Disk                 (also available on AnaCom's web site)
 
Cable Options
30720-010
Cable, DB-9 to ODU serial interface, length 10'  
 
30720-025
Cable,DB-9 to ODU serial interface, length 25'
 
30720-050
Cable,DB-9 to ODU serial interface, length 50'
 
31199-100
Cable,RS232/485 Adapter to ODU serial interface, length 100'
 
31199-150
Cable,RS232/485 Adapter to ODU serial interface, length 150'
 
31199-200
Cable,RS232/485 Adapter to ODU serial interface, length 200'
 
31198-003
Cable, LNC to Transceiver, length 3'
 
31198-006
Cable, LNC to Transceiver, length 6'
 
31198-010
Cable, LNC to Transceiver, length 10'
 
31198-015
Cable, LNC to Transceiver, length 15'
 
30933-010
Cable, RX switch to Transceiver, length 10',            
 
30933-015
Cable, RX switch to Transceiver, length 15',            
 
31196-005
Cable, Coax, RF low loss, Transceiver to SSPA, 5'
 
30953-005
Cable, M&C, Transceiver to SSPA, 5'
 
30952-005
Cable, M&C, Transceiver to Xicom TWTA, 5'
 
10625-012
Power Cord, AC, 3 Pin, 12' (Used on older units)
 
31185-015
Power Cord, AC, 4 Pin, 15'
   
Back  Super Extended Ku-Band LNCs
Part  
Number Description
  Options and Accessories
LNC Options sold with Transceiver:
30784-160
LNC, 165K Standard 
30784-110
LNC, 110K Option 
30784-090
LNC, 90K Option 
30784-080
LNC, 80K Option 
 
LNC Options sold without Transceivers
30784-160
LNC, 165K Standard 
30784-110
LNC, 110K Option 
30784-090
LNC, 90K Option 
30784-080
LNC, 80K Option 
 
10968
Filter, TX Reject, >50dB Rejection
 
30998
RF Port, LNC, SMA Tap (10.95 to 12.75 GHz)
 
31053-014
Cable, LNC RF Port (SMA) to BDC (Type N), RG141 Semi-Rigid, Length 14"
 
TBD
LNB, Phase Locked, +/-25 KHz, 11.7 to 12.2 GHz in, 950 to 1450 MHz out
 
TBD
LNB, Phased Locked, +/-25 KHz, 12.25 to 12.75 GHz in, 950 to 1450 MHz out
 
140 MHz IF Option (Specify at time of Order)