AnaCom's
series of INSAT C-Band VSAT transceivers are
available in transmitter output levels of 0 dBm, 2,
5, 10, 20, 30,
40, 50, 60, and 100 Watts, in single or redundant
configurations. Higher powers are available with
external HPAs. These transceivers are ruggedly built
for continuous outdoor duty in all types of
environments. They are especially suitable for SCPC,
MCPC, and DAMA applications.
Features
| Small, light
weight, Easy to install. |
| No indoor
equipment required. |
| Built in test
facilities for improved maintainability and
reduced dependence on external test equipment. |
| Compliant with
relevant CCITT and CCIR recommendations as well as
INTELSAT specifications. |
| Frequency agile
radio equipment. |
| Completely
independent TX and RX frequency selection. |
| Superior phase
noise. |
| Flexible,
universal power supply. |
Flexible
Applications
| Rural
Telecommunications Expansion |
| Industrial
Networking |
| LAN and WAN
extensions |
| Emergency link
restoration |
| Remote
Surveillance |
| Broadcast |
| Data distribution
and collection |
| Point-of-Sales
Systems |
| Video
teleconferencing |
| Conventional Voice
Traffic |
Compact,
Functional Design
AnaCom's INSAT C-Band
VSAT transceivers integrate all necessary functions
into a small, highly integrated out-door package which
provides excellent reliability in a wide range of
environments and functions.
INSAT
C-BAND VSAT TRANSCEIVER SERIES
0 dBm, 2, 5, 10, 20, 40, 50, 60 and 100 Watts
The up converter, down
converter, power amplifier, monitor and control and
power supply are included in a single enclosure. The
only cabling required to the indoor equipment are IF
cables. The LNC connects to the transceiver with a
single coaxial cable.
An ovenized, high
stability crystal oscillator is used to lock the TX
and RX synthesizers. The onboard microprocessor is
used to give additional temperature and aging
compensation.
BITE
Facility
To improve and simplify maintenance routines, an
external terminal (or computer) can be connected to
monitor a number of critical parameters without use of
additional test equipment. These include:
| Transmitter power
output level |
| Power supply
voltages |
| TX and RX local
oscillator stresses |
| Internal
temperature |
| Alarm details |
Controllable functions
from the terminal include:
| TX frequency |
| RX frequency
(independent from TX) |
| TX gain (including
ON / OFF) |
| RX gain |
| RF inhibit |
Comprehensive Monitor & Control
A powerful Monitor and Control feature allows you to
monitor and control the transceiver on the same M&C
bus with most indoor equipment such as modems and
multiplexers. The Monitor & Control system can be used
in combination with the unit's internal metering
function to monitor operational parameters.
Windows®-based
Supervisor M & C software is provided for use in
combination with a PC for monitoring and controlling
all major earth station equipment besides the
transceiver.
Benefits
| A family
of products with significant commonality
minimizes demands for spares and training. |
| "Last
Touch" controls allow for remote
configuration or local (manual)
configuration. |
| Flash
memory means that the transceiver always
powers up with exactly the same operating
conditions as when it lost power (or was
turned off). |
|
Comprehensive maintenance features for
operational effectiveness and minimum
outages. |
| Simple
installation. |
|
Manufactured using state-of-the-art
technology. |
|
|
|
AnaCom
INSAT C-BAND VSAT
Transceivers