<%@LANGUAGE="VBSCRIPT" CODEPAGE="1252"%> Satcom Services VSAT Services, Transponder Capacity, Communication
Fixed Wireless Broadband Communications - MMDS S-Band Booster Amplifiers
 
Repeater
Cell Extender
WLL Amplifier
MMDS Amplifier
MMDS Up-Converter
MMDS Mast Head Unit
Fixed Wirless Broadband Communications
 
Advantech’s S-Band ADVM family of Booster amplifiers are available in output power options of 50, 100, 200 and 400 Watts. The units can be mounted in a standard 19 inches rack and are also available in an outdoor hubmount configuration. Any of these amplifiers can be driven by Advantech’s ADVMU-20 Up-converter. The high linearity of these amplifiers makes them suitable for multiple carrier applications.

Advantech’s amplifiers are available in multiple configurations including:
 
  • Redundant and non-redundant
  • Indoor and Outdoor mounting

    Network Management
    ADVM series amplifiers also provide SNMP open protocol network management for network supervision.

    The ADVM series provide local alarm and status through LED as well as scrolling menu display. Remote monitoring is also available through the RS-485 connection provided on the unit as well as through an SNMP standard based interface.
  • LED status includes:
    • Power ON - RF ON
    • Remote - Mute
    • Alarms - Fault

    Additional standard features comprise the automatic over-temperature shutdown, the remote and local alarm indicators which contributes to smooth operation and greatly improves the life of the product. The ADVM series amplifiers allow both local and remote monitoring and control of the power amplifier. Monitoring and control are shown on the alphanumerical display, which provides Status as well as Alarm and Fault messages and details.

    The status messages include:

    • Reflected Power
    • Output Power
    • PA Hot Spot Temperature
    • PA Shroud Temperature
    • Power Current Consumption
    • Monitor Calibration
    • Output Monitor Coupling
    • Output Power Threshold
    • Mute PA
    • Go Remote
    		•
     
    Technical Specification of MMDS Booster Amplifiers

    *Output power for C/CTB=50 dBc (measured with CW carriers)
     
    Technical Specification of MMDS Booster Amplifiers
    8*
    channels     		16*
    channels     		20*
    channels     		Dimensions
    W x H x L, Inches     		Weight lbs/Kg Power Consumption  
    27 dBm 24 dBm 27 dBm 19 x 5.25 x 22 44 / 20 3.5 Amps @ 220 VAC  
    27 dBm 27 dBm 26 dBm 19 x 5.25 x 22 44/20 4.5 Amps @ 220 VAC  
    33 dBm 30 dBm 29 dBm 19 x 7 x 28 44/20 7.5 Amps @ 220 VAC  
    36 dBm 33 dBm 32 dBm 19 x 8.25 x 28 88/40 11 Amps @ 220 VAC